How to Read a THC Product's Certificate of Analysis (And What Wims's Actually Shows)
A certificate of analysis, or COA, is a lab report showing what is actually inside one batch of a THC product: how much THC and CBD it holds, and whether it passed screens for things like pesticides, solvents, and heavy metals. Learning how to read a COA takes about five minutes, and it is the fastest way to check a brand's label against an outside lab's numbers.
What Is a Certificate of Analysis for a THC Product?
A certificate of analysis is a report from a testing lab listing the cannabinoids and contaminants it measured in a sample from one production batch. For THC drinks and edibles, it is the closest thing to an ingredient check you can do from your couch.
How Do You Read a COA, Section by Section?
To read a COA, work through five checks from top to bottom: identity, cannabinoids, contaminant panels, missing tests, and the lab itself. Each one answers a different question about the product in your hand.
|
COA section |
What it tells you |
What to look for |
|---|---|---|
|
Header |
Which product and batch were tested, and when |
A batch number that matches your package and a recent test date |
|
Cannabinoid profile |
How much THC and CBD is in each serving |
Milligrams per unit close to the label, and which form of THC (delta-9, delta-8, or THCa) |
|
Contaminant panels |
Screens for residual solvents, heavy metals, pesticides, microbes, and mycotoxins |
"Pass" or "ND" on every line, not just in the summary |
|
ND, NR, and NT |
Whether something was absent or never checked |
ND means not detected; NR and NT mean the test was not run |
|
Lab details |
Who ran the test |
A named lab with contact details, a signature, and ideally a QR code to the original report |
What Does Wims's Certificate of Analysis Actually Show?
Wims's COA for Pocket-Tonic™ Unflavored, batch PL1733U4232, shows 4.22mg of THC and 4.27mg of CBD per packet, against a label of 4mg each. All of the THC measured was delta-9; delta-8 THC and THCa were not detected. Infinite Chemical Analysis Labs in San Diego completed the testing on September 17, 2024.
|
Panel |
What the lab checked |
Result for batch PL1733U4232 |
|---|---|---|
|
Cannabinoids |
11 cannabinoids |
4.22mg delta-9 THC and 4.27mg CBD per packet; the other 9 not detected |
|
Residual solvents |
20 solvents |
None detected |
|
Heavy metals |
Arsenic, cadmium, lead, mercury |
Lead at 0.007 µg/g against a 0.5 µg/g limit; the other three not detected |
|
Pesticides |
66 pesticides |
None detected |
|
Mycotoxins |
Aflatoxins B1, B2, G1, G2 and ochratoxin A |
None detected |
|
Microbials |
STEC E. coli, Salmonella, and four Aspergillus molds |
STEC and Salmonella not detected; Aspergillus not tested |
|
Other |
Moisture, water activity, terpenes |
Not tested |
Two lines are worth knowing about. The report is labeled "QA Sample, Informational Only," meaning Wims submitted the sample for its own quality check rather than as a state compliance sample.
Certified Delightful (Footnotes Included)
Every packet comes with a paper trail, and the fun part is still the drink. BevNET called Pocket-Tonic™ the first cannabis drink mixer in a pre-portioned snap-and-squeeze packet, and if it does not earn a spot in your glass, you can return your Wims within 30 days of delivery for a full refund. Read the label, skim the lab report, then pick your pocketful.
Frequently Asked Questions
What does ND mean on a certificate of analysis?
ND means not detected. The lab tested for the compound and found less than its limit of detection, the smallest amount its equipment can reliably spot. That is different from NR or NT, which means the test was never run. A line marked NT tells you nothing about whether the compound is present.
Why doesn't the THC on a COA exactly match the label?
Lab results usually land slightly above or below the label because of normal variation between batches and in testing itself. Wims's Unflavored batch PL1733U4232 measured 4.22mg THC and 4.27mg CBD per packet against a 4mg label for each. Large gaps between label and results are the ones worth questioning.
How can I tell if a COA is real?
Check that the lab is named and lists an address, phone number, and a signing lab director. Match the batch number to your package, and scan the QR code if there is one to pull the report from the lab's own system. If something looks off, contact the lab directly and ask.
Reading a COA comes down to four moves: match the batch, check the milligrams, scan every contaminant panel, and notice what was not tested. A brand that shows you the whole report, gaps included, is telling you more than any label can. Wims puts its Pocket-Tonic™ numbers where you can check them.